is important for us to understand the advantages of geothermal energy, the uses of this energy are a benefit for the conservation of our planet, so is important for new generation to acquire knowledge about geothermal energy, beacuse with the resources of our planet we can produce energy for our uses, without global warming.
There are a lot of resources that our planet give us, and that is a reason for the replacement of fossils fuels byenergy created by heat, preventing a massive global warming. The anwer of our problem are on the planet , the most powerful resources are created by earth, but the costs and studies for the utilization of this kind of energy is oa problematic for replacement of fossils fuels. There are too a lot of benefits in geothermal energy that the humankind are no taking on count, its a form of heat generation without fuels, are a form of reduce the costs of electricity in other cases, but it is necessary a lot of studies and invertions that the people are not agree . So is not a secret that this energy source have more advantages than disadvantages for us and for our planet.
there are many ways to obtain geothermal energy and this proceses are the base of my investigation beacuse with this processes we obtain the advantages and disadvantages of geothermal energy.
my principal source is a web page http://www.ucsusa.org/clean_energy/our-energy-choices/renewable-energy/how-geothermal-energy-works.html
and i want to show a little part of this page for understand my investigation.
How Geothermal Energy Is Captured
Geothermal springs for power plants. The most common current way of capturing the energy from geothermal sources is to tap into naturally occurring "hydrothermal convection" systems where cooler water seeps into Earth's crust, is heated up, and then rises to the surface. When heated water is forced to the surface, it is a relatively simple matter to capture that steam and use it to drive electric generators. Geothermal power plants drill their own holes into the rock to more effectively capture the steam.
There are three designs for geothermal power plants, all of which pull hot water and steam from the ground, use it, and then return it as warm water to prolong the life of the heat source. In the simplest design, the steam goes directly through the turbine, then into a condenser where the steam is condensed into water. In a second approach, very hot water is depressurized or "flashed" into steam which can then be used to drive the turbine.
In the third approach, called a binary system, the hot water is passed through a heat exchanger, where it heats a second liquid—such as isobutane—in a closed loop. The isobutane boils at a lower temperature than water, so it is more easily converted into steam to run the turbine. The three systems are shown in the diagrams below.
There are three designs for geothermal power plants, all of which pull hot water and steam from the ground, use it, and then return it as warm water to prolong the life of the heat source. In the simplest design, the steam goes directly through the turbine, then into a condenser where the steam is condensed into water. In a second approach, very hot water is depressurized or "flashed" into steam which can then be used to drive the turbine.
In the third approach, called a binary system, the hot water is passed through a heat exchanger, where it heats a second liquid—such as isobutane—in a closed loop. The isobutane boils at a lower temperature than water, so it is more easily converted into steam to run the turbine. The three systems are shown in the diagrams below.
 |  |  |
| Dry steam | Flash steam | Binary cycle |
Click any of the images to see a larger version. Source: NREL
The choice of which design to use is determined by the resource. If the water comes out of the well as steam, it can be used directly, as in the first design. If it is hot water of a high enough temperature, a flash system can be used, otherwise it must go through a heat exchanger. Since there are more hot water resources than pure steam or high-temperature water sources, there is more growth potential in the heat exchanger design.
The largest geothermal system now in operation is a steam-driven plant in an area called the Geysers, north of San Francisco, California. Despite the name, there are actually no geysers there, and the heat that is used for energy is all steam, not hot water. Although the area was known for its hot springs as far back as the mid-1800s, the first well for power production was drilled in 1924. Deeper wells were drilled in the 1950s, but real development didn't occur until the 1970s and 1980s. By 1990, 26 power plants had been built, for a capacity of more than 2,000 MW.
The Geysers (Source: NREL)
The largest geothermal system now in operation is a steam-driven plant in an area called the Geysers, north of San Francisco, California. Despite the name, there are actually no geysers there, and the heat that is used for energy is all steam, not hot water. Although the area was known for its hot springs as far back as the mid-1800s, the first well for power production was drilled in 1924. Deeper wells were drilled in the 1950s, but real development didn't occur until the 1970s and 1980s. By 1990, 26 power plants had been built, for a capacity of more than 2,000 MW.
The Geysers (Source: NREL)
Because of the rapid development of the area in the 1980s, and the technology used, the steam resource has been declining since 1988. Today, owned primarily by California- utility Calpine and with a net operating capacity of 725 MW, the Geysers facilities still meets nearly 60 percent of the average electrical demand for California's North Coast region (from the Golden Gate Bridge north to the Oregon border).6 The plants at the Geysers use an evaporative water-cooling process to create a vacuum that pulls the steam through the turbine, producing power more efficiently. But this process loses 60 to 80 percent of the steam to the air, without re-injecting it underground. While the steam pressure may be declining, the rocks underground are still hot. To remedy the situation, various stakeholders partnered to create the Santa Rosa Geysers Recharge Project, which involves transporting 11 million gallons per day of treated wastewater from neighboring communities through a 40-mile pipeline and injecting it into the ground to provide more steam. The project came online in 2003, and in 2008 provided enough additional electricity for approximately 100,000 homes. The city of Santa Rosa plans to further expand this program by increasing the amount of wastewater sent to the Geysers to nearly 20 million gallons per day.7
One concern with open systems like the Geysers is that they emit some air pollutants. Hydrogen sulfide—a toxic gas with a highly recognizable "rotten egg" odor—along with trace amounts of arsenic and minerals, is released in the steam. In addition, at a power plant at the Salton Sea reservoir in Southern California, a significant amount of salt builds up in the pipes and must be removed. While the plant initially started to put the salts into a landfill, they now re-inject the salt back into a different well. With closed-loop systems, such as the binary system, there are no emissions; everything brought to the surface is returned underground.
Direct use of geothermal heat. Geothermal springs can also be used directly for heating purposes. Hot spring water is used to heat greenhouses, to dry out fish and de-ice roads, for improving oil recovery, and to heat fish farms and spas. In Klamath Falls, Oregon, and Boise, Idaho, geothermal water has been used to heat homes and buildings for more than a century. On the east coast, the town of Warm Springs, Virginia obtains heat directly from spring water as well, using springs to heat one of the local resorts.8
In Iceland, virtually every building in the country is heated with hot spring water. In fact, Iceland gets more than 50 percent of its energy from geothermal sources.9 In Reykjavik, for example (population 115,000), hot water is piped in from 25 kilometers away, and residents use it for heating and for hot tap water.
One concern with open systems like the Geysers is that they emit some air pollutants. Hydrogen sulfide—a toxic gas with a highly recognizable "rotten egg" odor—along with trace amounts of arsenic and minerals, is released in the steam. In addition, at a power plant at the Salton Sea reservoir in Southern California, a significant amount of salt builds up in the pipes and must be removed. While the plant initially started to put the salts into a landfill, they now re-inject the salt back into a different well. With closed-loop systems, such as the binary system, there are no emissions; everything brought to the surface is returned underground.
Direct use of geothermal heat. Geothermal springs can also be used directly for heating purposes. Hot spring water is used to heat greenhouses, to dry out fish and de-ice roads, for improving oil recovery, and to heat fish farms and spas. In Klamath Falls, Oregon, and Boise, Idaho, geothermal water has been used to heat homes and buildings for more than a century. On the east coast, the town of Warm Springs, Virginia obtains heat directly from spring water as well, using springs to heat one of the local resorts.8
In Iceland, virtually every building in the country is heated with hot spring water. In fact, Iceland gets more than 50 percent of its energy from geothermal sources.9 In Reykjavik, for example (population 115,000), hot water is piped in from 25 kilometers away, and residents use it for heating and for hot tap water.
Ground-source heat pumps. A much more conventional way to tap geothermal energy is by using geothermal heat pumps to provide heat and cooling to buildings. Also called ground-source heat pumps, they take advantage of the constant year-round temperature of about 50°F that is just a few feet below the ground’s surface. Either air or antifreeze liquid is pumped through pipes that are buried underground, and re-circulated into the building. In the summer, the liquid moves heat from the building into the ground. In the winter, it does the opposite, providing pre-warmed air and water to the heating system of the building.
Ground-source heat pump (Source: NREL)
In the simplest use of ground-source heating and cooling, a tube runs from the outside air, under the ground, and into a house's ventilation system. More complicated, but more effective systems use compressors and pumps—as in electric air conditioning systems—to maximize the heat transfer.
In regions with temperature extremes, such as the northern United States in the winter and the southern United States in the summer, ground-source heat pumps are the most energy-efficient and environmentally clean heating and cooling system available. Far more efficient than electric heating and cooling, these systems can move as much as 3 to 5 times the energy they use in the process. The U.S. Department of Energy found that heat pumps can save a typical home hundreds of dollars in energy costs each year, with the system typically paying for itself in 8 to 12 years. Tax credits and other incentives can reduce the payback period to 5 years or less.10
In regions with temperature extremes, such as the northern United States in the winter and the southern United States in the summer, ground-source heat pumps are the most energy-efficient and environmentally clean heating and cooling system available. Far more efficient than electric heating and cooling, these systems can move as much as 3 to 5 times the energy they use in the process. The U.S. Department of Energy found that heat pumps can save a typical home hundreds of dollars in energy costs each year, with the system typically paying for itself in 8 to 12 years. Tax credits and other incentives can reduce the payback period to 5 years or less.10
More than 600,000 ground-source heat pumps supply climate control in U.S. homes and other buildings, with new installations occurring at a rate of about 60,000 per year.11 While this is significant, it is still only a small fraction of the U.S. heating and cooling market, and several barriers to greater penetration into the market remain. For example, despite their long-term savings, geothermal heat pumps have higher up-front costs. In addition, installing them in existing homes and businesses can be difficult, since it involves digging up areas around a building’s structure. Finally, many heating and cooling installers are just not familiar with the technology.
However, ground-source heat pumps are catching on in some areas. In rural areas without access to natural gas pipelines, homes must use propane or electricity for heating and cooling. Heat pumps are much less expensive to operate, and since buildings are widely spread out, installing underground loops is not an issue. Underground loops can be easily installed during construction of new buildings as well, resulting in savings for the life of the building. Furthermore, recent policy developments are offering strong incentives for homeowners to install these systems. The 2008 economic stimulus bill, Emergency Economic Stabilization Act of 2008, includes an eight year extension (through 2016) of the 30 percent investment tax credit, with no upper limit, to all home installations of EnergyStar certified geothermal heat pumps.12
However, ground-source heat pumps are catching on in some areas. In rural areas without access to natural gas pipelines, homes must use propane or electricity for heating and cooling. Heat pumps are much less expensive to operate, and since buildings are widely spread out, installing underground loops is not an issue. Underground loops can be easily installed during construction of new buildings as well, resulting in savings for the life of the building. Furthermore, recent policy developments are offering strong incentives for homeowners to install these systems. The 2008 economic stimulus bill, Emergency Economic Stabilization Act of 2008, includes an eight year extension (through 2016) of the 30 percent investment tax credit, with no upper limit, to all home installations of EnergyStar certified geothermal heat pumps.12
